BED52 type LED explosion proof floodlight

◆ aluminum alloy die-casting shell, with high-voltage electrostatic spraying on the surface;

◆ toughened glass with high energy impact resistance, heat resistance, heat fusion resistance and high light transmittance;

◆ stainless steel exposed fasteners with high corrosion resistance;

◆ the separated structure of the light source cavity and the power supply cavity can effectively ensure that the heat of the light source cavity will not be transmitted to the power supply cavity;

◆ the junction box is labyrinth structure, equipped with silicone rubber foam sealing strip, which is firmly pasted with high protection level;

◆ special constant current drive, single / wide voltage input, constant power output, with shunt, constant current, overcurrent, open circuit, short circuit, anti electromagnetic interference and other functions;

◆ power factor cos φ ≥ 0,95

◆ independent anti surge device

◆ adopt high heat conduction aluminum base plate, use high heat silicone grease to paste the light source plate, to ensure that the heat generated when the light source works is completely transmitted to the radiator;

◆ optical parts and anti glare parts - the innovative design adopts multi-point light distribution with uniform illuminance and no glare, reasonable beam distribution, uniform illuminance and high utilization efficiency;

◆ cable wiring

Ex rating:ExdeⅡCT6 Gb，ExtD A21 IP66 T80℃ 

Rated voltage：AC220V 50-60HZ(Please note if have requirement)

protection grade：IP65、IP66* 

Corrosion-proof grade：WF1 、WF2* 

Inlet thread：G3/_{4”, suitable for φ8-14mm cable}

Terminal block: ≤4mm² reliable wire connection  

Mounting type：x- ceiling type, z- bracket type

Executive standard:GB3836.1、GB3836.2、GB12476.1、GB12476.5、IEC60079-0、IEC60079-1、IEC60079-7、IEC61241-0、IEC61241-1、EN60079-0、EN60079-1、EN60079-7、EN61241-0、EN61241-1